|
The
chairman, Mahratta Chamber of Commerce and Industries,
Pune has represented that in case of many industrial
units who are the members of their chamber, the consumption
of light fittings attached to the machine tools is
not treated under the same industrial tariff for the
purpose of billing but same is billed at the separate
tariff meant for lighting.
As far as H.T industrial consumers are concerned,
the question of billing such consumption separately
will not arise as in tariff it has been clearly stated
that the Factory lighting consumption is to be billed
under same HTP-1 or HTP-2 tariff as the case may be.
The issue raised by the chamber is mainly related
with the L.T small scale industrial consumers as our
tariff LTP-G is silent in respect of billing of factory
lighting or even as regard the built - in lamps on
machines.
Therefore, the issue was placed before the Board in
its meeting held on 28.12.1978 and the Board Vide
B.R.No. 1399 dated 28-12- 1978 has approved as follows:-
In case of L.T motive power consumers the consumption
of light fittings attached to the Machines should
be billed under the same tariff as applicable for
industrial purposes i.e. LTP-G, as done in case of
factory lighting under HTP-1/ HTP-2 tariff applicable
to HT consumers.
It may please be noted that the above decision is
applicable only in respect of consumption of in built
light fittings of the Machines. The consumption of
other lighting in the factory premises, is to be billed
separately under commercial L & F tariff as hitherto.
|
